Before you get your hopes high, this post is not (yet?) a tutorial on creating a windows 10 virtual machine using the Virtual Machine Manager (virt-manager) GUI. It should have been, though. I spent the better part of a week trying to configure and install a Windows 10 VM that delivers the performance that I’m used to.

As it turns out, it was a failure. Don’t get me wrong, I did manage to configure and run Windows using virt-manager and virsh. I even installed it multiple times, changing the configuration to what I hoped would improve performance. But whatever I tried, I never got even near the speed and snappiness that I achieve by following my tutorial using a start script .

Many users myself included rather prefer the comfort of a graphical user interface with check boxes and pull-down menus to select the various options. I’ve listed some tutorials using the virt-manager at the end, for those who came to find a solution.

Table of Contents

My Hardware & Software Setup Virtual Machine Manager Pros and Cons Virtual Machine Manager Tutorials Background

For almost 2 1/2 years I’ve been a happy camper with KVM and VGA passthrough. But lately I noticed a performance drop inside the VM, specifically 2D graphics performance.

Later it turned out that the performance drop was related to a Microsoft Windows firmware update to mitigate the Spectre vulnerability.

Before I discovered the cause, I thought I might as well try out libvirt with virt-manager. I had recently upgraded the host to linux Mint 19 (Ubuntu 18.04 based) doing a fresh install. Much has been updated, and this time Linux Mint actually ships with the latest virt-manager release.

My Hardware & Software Setup

It’s important to be precise about the system and the software that is used, especially when it comes to virtualization. Here is my hardware and software configuration that I used for virt-manager/libvirt based VGA passthrough.

Hardware Intel i7 3930k 6-core CPU with hyperthreading (12 threads total) Asus Sabertooth X79 motherboard with latest BIOS release 4801 Gigabyte / Nvidia Geforce GTX970 GPU for passthrough (with UEFI BIOS) PNY / Nvidia Quadro 2000 GPU for host (legacy BIOS) Samsung EVO 860 1TB SATA-3 SSD for Windows VM 24 GB RAM (16GB for Windows VM) Software Linux host: Linux Mint 19 Tara with Mate desktop (based on Ubuntu 18.04 Bionic) Kernel: 4.15.0-30 qemu-system-x86_64: 2.11.1 libvirt: 4.0.0-1 virt-manager: 1.5.1-0 OVMF (UEFI BIOS): 20180205 Windows guest: Windows 10 Pro 64 bit, release 1803 (latest ISO image as of this writing) Virtio drivers: virtio-win-0.1.140.iso Nvidia GTX970 graphics driver: 398.82 Trial and Error

I did some research first, cross-referencing qemu scripts and virtlib xml configuration files and reading up on recent developments. A good source of information is the libvirt.org website. While it explains the zillions of xml config file options, it doesn’t give you the grand picture. Always worth reading is the Arch Linux wiki (see link below under “Virtual Machine Manager Tutorials”). A few helpful hints came from a virt-manager developer.

But in the end it was down to trial and error. First I installed Windows directly onto a new SSD and ran some benchmarks for reference. Then I reformatted the disk and created a storage pool using Virtual Machine Manager (virt-manager) backed by LVM storage.

The easiest part was the passthrough of the graphics card and some USB controllers. Installing Windows is rather time consuming, especially turning off all the nonsense that is shipped and turned on by default.

Once I had all the drivers installed and a system that looked ready for testing, I ran Passmark 8. Below are the results of several different trials (meaning new (re-)installations of Windows), with a comparison to my bare metal Windows installation:


Creating a Windows 10 Virtual Machine Using the Virtual Machine Manager (virt-ma ...
Passmark results running Windows 10 Pro 64 bit in VMs created with virt-manager, versus bare metal (yellow graph)

The yellow graph in the middle shows the bare metal performance of Windows, with a Passmark result of 4821.

The purple graph represents benchmarks done on my original VM run by a qemu start script without virt-manager/libvirt.

The first two graphs (red and blue) and the last graph (green) are different configurations using virt-manager/libvirt, and “fine-tuning” the xml config file. Obviously this hasn’t been very successful.

Tuning the configuration I was able to get some decent results using virt-manager, but not without editing the xml configuration. The whole process is cumbersome, though. It’s definitely a lot quicker to make a change in a qemu script.

Virtual Machine Manager Pros and Cons virt-manager pros Features are more in line with the latest qemu/kvm developments Latest virt-manager version in Ubuntu 18.04 release (at the time of the release, now the latest virt-manager version is 2.0) Improved VM configurability Better integration in Ubuntu (dependencies, permissions, etc.) VM can be controlled from host using virsh virt-manager cons Basic options still missing, for example “kvm=off” option Interface not intuitive Hidden options such as “host-passthrough” Network bridge configuration interferes with existing network bridge Requires editing cryptic xml configuration file xml needs to be edited using vish a command-line tool that doesn’t offer modern editing tools Configuration changes are difficult to implement, often requiring a new VM installation virt-manager essentially creates a qemu command line to start the VM, but doesn’t save the configuration in a human readable format No transparency in the way virt-manager configures the VM Doesn’t keep up with new qemu/kvm features and options Virtual Machine Manager Tutorials

Probably most of the VGA passthrough tutorials out on the Internet are now using virt-manager to configure the virtual machine. The following are among the better or more popular ones:

VFIO GPU How To series (written by a kvm developer) Play games in Windows on Linux! PCI passthrough quick guide (includes a Youtube video tutorial ) GPU passthrough: gaming on Windows on Linux Arch Linux | Virt-Manager Windows 10 KVM with OVMF (video tutorial using Arch Linux) PCI passthrough via OVMF (the Arch Linux wiki, an excellent source of information

If you were looking for a VGA passthrough tutorial using the virt-manager GUI, the above links will get you most likely to a working Windows VM (unless your hardware or software doesn’t meet the requirements).

本文系统(windows)相关术语:三级网络技术 计算机三级网络技术 网络技术基础 计算机网络技术

代码区博客精选文章
分页:12
转载请注明
本文标题:Creating a Windows 10 Virtual Machine Using the Virtual Machine Manager (virt-ma ...
本站链接:https://www.codesec.net/view/611227.html


1.凡CodeSecTeam转载的文章,均出自其它媒体或其他官网介绍,目的在于传递更多的信息,并不代表本站赞同其观点和其真实性负责;
2.转载的文章仅代表原创作者观点,与本站无关。其原创性以及文中陈述文字和内容未经本站证实,本站对该文以及其中全部或者部分内容、文字的真实性、完整性、及时性,不作出任何保证或承若;
3.如本站转载稿涉及版权等问题,请作者及时联系本站,我们会及时处理。
登录后可拥有收藏文章、关注作者等权限...
技术大类 技术大类 | 系统(windows) | 评论(0) | 阅读(87)