How to Create a "Share the Love" Icon Pack in Adobe Illustrator
How to Create a "Share the Love" Icon Pack in Adobe Illustrator
What You'll Be Creating
Since this week is all about love, we’re going to continue the theme and create a "Share the Love" icon pack to explore the different ways in which you can express your feelings in the digital era.
We’re going to be creating all three icons using basic geometric shapes combined with some of the primary tools that you probably already work with on a daily basis.
So, without wasting any more time, grab a cup of that sweet coffee and let’s get started!
Oh, and before I forget, you can always expand the project by checking out GraphicRiver , where you can find tons of love-themed icons .1. How to Set Up a New Document
Since I’m pretty sure you already have Illustrator up and running in the background, bring it up and let’s set up a New Document ( File > New or Control-N ) using the following settings:Number of Artboards: 1 Width: 800 px Height: 600 px Units: Pixels
And from the Advanced tab:Color Mode: RGB Raster Effects: Screen (72ppi) Preview Mode: Default
Quick tip: some of you might have noticed that the Align New Objects to Pixel Grid option is missing. That's because I’m running the new CC 2017 version of the software, where great changes have been made to the way Illustrator handles the way shapes snap to the underlying pixel grid.2. How to Set Up a Custom Grid
Since we’re going to be creating the icons using a pixel-perfect workflow, we’ll want to set up a nice little grid so that we can have full control over our shapes―that is if we’re running the older version of the software.Step 1
Go to the Edit > Preferences > Guides & Grid submenu, and adjust the following settings:Gridline every: 1 px Subdivisions: 1
Quick tip: you can learn more about grids by reading this in-depth piece on how Illustrator’s Grid System works .Step 2
Once we’ve set up our custom grid, all we need to do in order to make sure our shapes look crisp is enable the Snap to Grid option found under the View menu, which will transform into Snap to Pixel each time you enter Pixel Preview mode.
Now, if you’re new to the whole “pixel-perfect workflow”, I strongly recommend you go through my how to create pixel-perfect artwork tutorial, which will help you widen your technical skills in no time.3. How to Set Up the Layers
With the New Document created, it would be a good idea to structure our project using a couple of layers, since this way we can maintain a steady workflow by focusing on one icon at a time.
That being said, bring up the Layers panel, and create a total of four layers, which we will rename as follows:layer 1 : reference grids layer 2 : phone sharing layer 3 : email sharing layer 4 : im sharing
4. How to Create the Reference Grids
The reference grids (or base grids) are a set of precisely delimited reference surfaces, which allow us to build our icons by focusing on size and consistency.
Usually, the size of the grids determines the size of the actual icons, and they should always be the first decision you make on you start a new project, since you’ll always want to start from the smallest possible size and build on that.
Now, in our case, we’re going to be creating the icon pack using just one size, more exactly 128 x 128 px , which is a fairly large one.Step 1
Start by locking all but the reference grid layer, and then grab the Rectangle Tool (M) and create a 128 x 128 px orange ( #F15A24 ) square, which will help define the overall size of our icons.
Add another smaller 120 x 120 px one ( #FFFFFF ) which will act as our active drawing area, thus giving us an all-around 4 px padding.
Group the two squares composing the reference grid using the Control-G keyboard shortcut, and then create two copies at a distance of 40 px from one another, making sure to align them to the center of the Artboard .
Once you’re done, lock the current layer and move on to the next one, where we’ll start working on our first icon.
5. How to Create the Phone Sharing Icon
With the document all set up, let’s kick off the project by making sure that we’re on the right layer (that would be the second one) and then zooming in on the first reference grid so that we can have a better view of our icon’s shapes.Step 1
Start working on the left phone by creating its body using a 56 x 94 px rounded rectangle with an 8 px Corner Radius , which we will color using #C4CEE8 and then position in the underlying active drawing area’s bottom-left corner, making sure to leave a 4 px gap for its outline.
Give the shape that we’ve just created an outline, by creating a copy of it ( Control-C ) which we will paste in front ( Control-F ) and then adjust by changing its color to #2B3249 , and then setting its Weight to 8 px .
Once you’re done, select and group both shapes together using the Control-G keyboard shortcut.
Start working on the phone’s display by creating a 32 x 58 px rectangle, which we will color using #8195C1 and then horizontally center align to the two shapes that we’ve just grouped, at a distance of 12 px from the top edge of the fill shape’s visible surface.
Give the display an 8 px thick outline ( #2B3249 ) using the Stroke method, selecting and grouping ( Control-G ) both shapes together afterwards.
Create the phone’s bottom circular button, using an 8 x 8 px circle which we will color using #2B3249 and then center align.
Turn on Pixel Preview mode, and using the Pen Tool (P) draw in the front-facing speaker unit, using a 12 px wide, 4 px thick Stroke with a Round Cap , which we will color using #2B3249 and then center align to the visible surface of the phone’s upper section.
Create the phone’s power button using a 12 x 4 px rectangle, which we will color using #2B3249 and then position onto the larger outline, at a distance of 12 px from the active drawing area’s left edge.
Adjust the shape that we’ve just created by setting the Radius of its top corners to 2 px from within the Transform panel’s Rectangle Properties , selecting and grouping ( Control-G ) all of the phone’s composing shapes together afterwards.
Create the second phone using a copy ( Control-C > Control-F ) of the one that we’ve just finished working on, which we will reflect both horizontally and vertically ( right click > Transform > Reflect > Horizontal / Vertical ), and then position onto the right side of the active drawing area, aligning it to its top edge.
Start working on the little heart by creating a 20 x 20 px circle, which we will color using #ED664C and then position onto the left phone’s display, at a distance of 9 px from its top edge and 6 px from its left edge.
Continue working on the heart by creating two more 20 x 20 px circles ( #ED664C ), positioning one on the right side so that it ends up overlapping the surface of the first one by 4 px , and the last one at the bottom, so that it overlapsthe surface of the other two by 8px .
Once you have all three circles in place, select and then unite them into a single larger shape using Pathfinder ’s Unite Shape Mode .
Adjust the resulting shape by removing the center anchor points created during the uniting process, by simply clicking on them using the Delete Anchor Point Tool (-) .
Continue adjusting the new shape by selecting its anchor’s handles and dragging them so that you get a nice curvature on each of its sides. Once you’re done, give the resulting shape an 8 px thick outline ( #2B3249 ) with a Round Join , selecting and grouping both shapes together afterwards.
Since we’ll want the heart to remain within the visible surface of the phone’s display, we’ll have to mask it using a 24 x 50 px rectangle (highlighted with yellow), which we will center align to the display. Then, simply select both the heart and the rectangle, right-click and select Make Clipping Mask , making sure to group it and the left phone together using the Control-G keyboard shortcut.
Finish off the icon by creating a copy of the masked heart and then center aligning it to the right phone’s display, making sure to flip it vertically ( right click > Transform > Reflect > Vertical ).
Once you have it in place, group ( Control-G ) it along with the phone, doing the same for all of the icon’s composing sections afterwards.
6. How to Create the Email Sharing Icon
Assuming you’ve already moved on up to the next layer (that would be the third one), zoom in on the second reference grid and let’s get started.Step 1
Create the envelope’s main body using a 96 x 64 px rectangle, which we will color using #ED664C and then center align to the underlying active drawing area, at a distance of 4 px from its bottom edge.
Adjust the shape that we’ve just created by setting the Radius of its bottom corners to 8 px from within the Transform panel’s Rectangle Properties .
Give the resulting shape an 8 px thick outline ( #2B3249 ) using the Stroke method, only this time set its Corner to Round Join , making sure to select and group ( Control-G ) both shapes together afterwards.
Create the envelope’s upper section using a 96 x 64 px rectangle, which we will color using #BF402E and then center align to its bottom section, positioning it so that its lower half overlaps it.
Turn the shape that we’ve just created into a diamond by adding a new anchor point to the center of each of its edges using the Add Anchor Point Tool (+) , and then removing its corner ones (highlighted in the reference image) using the Delete Anchor Point Tool (-) .
Give the resulting shape an 8 px thick outline ( #2B3249 ) making sure to set the Stroke ’s Corner to Round Join , selecting and grouping ( Control-G ) the two shapes together afterwards.
Select the Pen Tool (P) and draw in the envelope’s two diagonal detail lines using an 8 px thick Stroke ( #2B3249 ) with a Round Cap .
Create the letter’s main body using a 64 x 80 px rounded rectangle with an 8 px Corner Radius , which we will color using #F4E9E9 and then center align to the underlying active drawing area, at a distance of 4 px from its top edge.
Give the shape that we’ve just created an 8 px thick outline ( #2B3249 ), selecting and grouping both shapes afterwards using the Control-G keyboard shortcut.
Step 10 Quickly unlock the previous layer, and create a copy ( Control-C ) of the heart that we’ve masked and paste it back ( Control-F ) onto the current layer, center aligning it to the envelope’s letter, positioning it at
本文系统（windows）相关术语:三级网络技术 计算机三级网络技术 网络技术基础 计算机网络技术
本文标题：How to Create a "Share the Love" Icon Pack in Adobe Illustrator