Headless Raspberry PiSetup
Don’t have an extra keyboard or HDMI cable? Here’s how to do a headless Raspbian install on your Pi.Step 1. Download RaspbianImage
Head on over here to grab a copy of the Raspbian image. The “Lite” version will do.
Step 2. Write Image to SDCard
Write the image to SD card. You can find detailed instructions here .
Step 3. Add “SSH” File to the SD CardRoot
Enable SSH by placing a file named “ssh” (without any extension) onto the boot partition of the SD card:
Step 4. Boot yourPi
Pop your prepared SD card, power and a network cable into the Pi.
Step 5. Find your PI’s IPAddress
To configure your Pi, you need the IP address. You can find this in your Router’s DHCP lease allocation table:
Step 6. SSH into yourPi
Use your favourite SSH client (I prefer PuTTY ) to access the Pi. The default credentials are:username: pi password: raspberry
Step 7. Configure yourPi
That’s it! You can now configure your Pi via sudo raspi-config
Originally published at jamesfmackenzie.com
本文系统（linux）相关术语:linux系统 鸟哥的linux私房菜 linux命令大全 linux操作系统