Walkthrough of my .vimrc file for Ruby development

字体大小 | |
[系统(linux) 所属分类 系统(linux) | 发布者 店小二04 | 时间 2016 | 作者 红领巾 ] 0人收藏点击收藏

There are a lot of people who want to use vim as their text editor of choice. There are several problems that might turn off newcomers and one of them is extensive configuration file that you need to write in order for it to work properly. That's why I created this walkthrough for my .vimrc file explaining what each line does. Quite frankly this will allow me to understand my vimrc better and remove unnecessary things. With that in mind, let's begin:

set nocompatible " be iMproved

Just signals to vim that it does not have to be compatible with vi. This line is a must.

" For vundle filetype off set rtp+=~/.vim/bundle/Vundle.vim call vundle#rc()

These few lines are needed to initialize Vundle plugin. This plugin is responsible for managing dependencies. Next lines are just plugin definitions, where the string is github repository.

" Dependencies of snipmate Bundle "MarcWeber/vim-addon-mw-utils" Bundle "tomtom/tlib_vim" Bundle "honza/vim-snippets" " Snippets for our use :) Bundle 'garbas/vim-snipmate'

These are the dependencies of snipmate, which allows to autocomplete many exprssions. For example, yo can type def<tab> and that will expand to:

def method_name end " Git tools Bundle 'tpope/vim-fugitive'

These are tools that will make your VIM in to the supercharged tool to work with GIT. I won't dive in to the details, just read the docs .

" Dependency managment Bundle 'gmarik/vundle'

Dependency management plugin itself.

" Rails :/ Bundle 'tpope/vim-rails.git'

These are the tools that will make your rails development easier. Some of the commands that I use will be listed below.

" Commenting and uncommenting stuff Bundle 'tomtom/tcomment_vim'

This allows commenting and uncommenting sections of your code. I use gc to do that.

" Molokai theme Bundle 'tomasr/molokai'

Molokai theme

" Vim Ruby Bundle 'vim-ruby/vim-ruby'

Adds syntax highlighting for Ruby.

" Surround your code :) Bundle 'tpope/vim-surround'

Great plugin if you want to change braces to curly braces or p tag to div tag or any other combination that you might imagine. Make sure to check it out .

" Every one should have a pair (Autogenerate pairs for "{[( ) Bundle 'jiangmiao/auto-pairs'

Will generate pairs for most common code blocks. This is default behaviour in most text editors.

" Tab completions Bundle 'ervandew/supertab'

Tab completion. When typing something that vim has already opened, it will try to autocomplete method names, variables e.t.c.

" Fuzzy finder for vim (CTRL+P) Bundle 'kien/ctrlp.vim'

This is a fuzzy finder, similar to Atoms or Sublimes. Press CTRL+P and start writing appctrlrsapp and it will show up app/controllers/application_controller.rb in the search results. Very convenient.

Walkthrough of my .vimrc file for Ruby development
" For tests Bundle 'janko-m/vim-test'

Now this is one one great plugin. Instead of finding test runners for all your code, you can just use one and configure one. This works with Elixir and Ruby (My most commonly used languages) out of the box.

" Navigation tree Bundle 'scrooloose/nerdtree' Nerd tree is a nice file system navigation sidebar that is similar to one you see in atom or sublime.
Walkthrough of my .vimrc file for Ruby development
" Dispatching the test runner to tmux pane Bundle 'tpope/vim-dispatch'

This plugin is used to dispatch the tests to tmux pane and then output to a horizontal split to bottom. Really handy.

set tags=./tags; " Set tags directory

This line sets the ctags directory. Ctags can help with file navigation. It is quite tricky to make it work with ruby, but I had some success with it.

set autoindent " Auto indention should be on

Autoidention. Just makes sure that when pressing enter, the line will be automatically idented.

" Ruby stuff: Thanks Ben :) " ================ syntax on " Enable syntax highlighting filetype plugin indent on " Enable filetype-specific indenting and plugins augroup myfiletypes " Clear old autocmds in group autocmd! " autoindent with two spaces, always expand tabs autocmd FileType ruby,eruby,yaml,markdown set ai sw=2 sts=2 et augroup END " ================

Apparently sets two spaces for ruby, eruby, yaml and markdown files. This line has been added a long time ago, so I am even not sure anymore :)

" Syntax highlighting and theme syntax enable

Enables syntax highlighting

" Configs to make Molokai look great set background=dark let g:molokai_original=1 let g:rehash256=1 set t_Co=256 colorscheme molokai

Molokay theme specific configs

" Show trailing whitespace and spaces before a tab: :highlight ExtraWhitespace ctermbg=red guibg=red :autocmd Syntax * syn match ExtraWhitespace /\s\+$\| \+\ze\\t/

Highlights the trailing wihitespace with red if you have missed it.

Walkthrough of my .vimrc file for Ruby development
" Lovely linenumbers set nu

Enableling linumbers

" My leader key let mapleader=","

I map leader to comma, because it is much easier on OS-X.

" Searching set hlsearch

Highlights the areas that you search for.

set incsearch

Searches incremetally as you type.

set ignorecase

Ignores the case in the file.

set smartcase

If you start writing in camel case, it will assume that you want camelcased. Otherwise it will be case insesative.

" Remove highlights with leader + enter nmap <Leader><CR> :nohlsearch<cr>

Removing search highlights with ,Enter

" Buffer switching map <leader>p :bp<CR> " ,p previous buffer map <leader>n :bn<CR> " ,n next buffer map <leader>d :bd<CR> " ,d delete buffer

I usually move between buffers and want ability to delete them. Comments above explain my preferences on this.

map <Leader>c :call <CR> nmap <silent> <leader>c :TestFile<CR> nmap <silent> <leader>s :TestNearest<CR>

Running the test files - Current test file with ,c and current test under cursor with ,s .

map <leader>t :A<CR> " \t to jump to test file map <leader>r :r<cr> " \t to jump to related file

These commands come with rails-vim. Allow me to jump to test files and such.

set laststatus=2

Shows current status of the file

" Don't be a noob, join the no arrows key movement inoremap <Up> <NOP> inoremap <Down> <NOP> inoremap <Left> <NOP> inoremap <Right> <NOP> noremap <Up> <NOP> noremap <Down> <NOP> noremap <Left> <NOP> noremap <Right> <NOP>

These lines will help you to avoid habbit of using arrows to do things :)

" Removing escape ino jj <esc> cno jj <c-c> vno v <esc>

By pressing jj i can escape to normal mode any time instead of pressing ESC each time.

" highlight the current line set cursorline " Highlight active column set cuc cul"

Says what it does. Highlights active column and line.

" Tab completion set wildmode=list:longest,list:full set wildignore+=*.o,*.obj,.git,*.rbc,*.class,.svn,vendor/gems/*

Configuration for autocompletion

"""""""""""""""""""""""""""""""""""""""" " BACKUP / TMP FILES """""""""""""""""""""""""""""""""""""""" if isdirectory($HOME . '/.vim/backup') == 0 :silent !mkdir -p ~/.vim/backup >/dev/null 2>&1 endif set backupdir-=. set backupdir+=. set backupdir-=~/ set backupdir^=~/.vim/backup/ set backupdir^=./.vim-backup/ set backup " Save your swp files to a less annoying place than the current directory. " " If you have .vim-swap in the current directory, it'll use that. " " Otherwise it saves it to ~/.vim/swap, ~/tmp or . if isdirectory($HOME . '/.vim/swap') == 0 :silent !mkdir -p ~/.vim/swap >/dev/null 2>&1 endif set directory=./.vim-swap// set directory+=~/.vim/swap// set directory+=~/tmp// set directory+=. " viminfo stores the the state of your previous editing session set viminfo+=n~/.vim/viminfo if exists("+undofile") " undofile - This allows you to use undos after exiting and restarting " This, like swap and backups, uses .vim-undo first, then ~/.vim/undo " :help undo-persistence " This is only present in 7.3+ if isdirectory($HOME . '/.vim/undo') == 0 :silent !mkdir -p ~/.vim/undo > /dev/null 2>&1 endif set undodir=./.vim-undo// set undodir+=~/.vim/undo// set undofile endif

This huge block of code makes sure that you will have undo history, swap files are not saved in project directory, which can be annoying e.t.c. Copy this and it will work. If not, leave a comment.

" Ruby hash syntax conversion nnoremap <F12> :%s/:\([^ ]*\)\(\s*\)=>/\1:/g<return>

When you are too lazy to change old Ruby hash syntax to new one, this is a lifesaver!

nmap <Leader><CR> :nohlsearch<cr>

,Enter removes any search highlight

map <leader>q :NERDTreeToggle<CR>

Opens and closes Nerdtree with ,q

set clipboard=unnamed

Every copy and paste will interact with system cliboard. This helps a lot.

if has('nvim') let test#strategy = "neovim" else let test#strategy = "dispatch" endif

These lines set test strategy. I am sometimes using neovim, hence the conditional. For regular vim I use dispatch plugin for opening a test runner in tmux pane and for neovim I use the built in terminal.

Thats all folks. Hope you will find this helpful! You can find my vimrc and other rcfiles here .

本文系统(linux)相关术语:linux系统 鸟哥的linux私房菜 linux命令大全 linux操作系统

主题: RubyGitmaple
tags: gt,lt,vim,set,will
本文标题:Walkthrough of my .vimrc file for Ruby development

技术大类 技术大类 | 系统(linux) | 评论(0) | 阅读(180)